VE.Direct TX digital output cable (PWM light dimming cable)
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. Also, theavailability of the lighting will increase, even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED driver.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older software version can be updated for this
Τιμή χωρίς ΦΠΑ
Temperature sensor for BlueSolar PWM-Pro
Αισθητήρας θερμότητας για τους ρυθμιστές φόρτισης BlueSolar PWM-Pro.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
The temperature sensor is compatible with the following Victron charge controllers:
SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445
SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445
SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445
Delivery scope:
1x Victron Temperature Sensor for BlueSolar PWM-Pro
Victron Temperature sensor for BlueSolar PWM-Pro
Αισθητήρας θερμότητας για το BlueSolar PWM-Pro.
Description
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
Τιμή χωρίς ΦΠΑ
Victron BlueSolar PWM-Light 12/24V-5A – Ρυθμιστής Φόρτισης PWM 5A για Φωτοβολταϊκά
Victron BlueSolar PWM-Light 12/24V-5A - Ρυθμιστής Φόρτισης PWM 5A για για Φωτοβολταϊκά
Ρυθμιστής φόρτισης της Victron με εσωτερικό αισθητήρα θερμοκρασίας. Έχει τρία στάδια φόρτισης μπαταριών (Bulk, absortion, float), προστασία από βραχυκύκλωμα και υπερ-εντάσεις όπως και από ανάστροφη πολίκότητα των ηλιακών συλλεκτών και/ή της μπαταρίας.
Προγραμματιζόμενος με νυχτερινή λειτουργία
- Ο ρυθμιστής φόρτισης BlueSolar PWM Light 12/24V-5A είναι έτοιμος για χρήση με τις προεπιλεγμένες ρυθμίσεις του.
- Τρία στάδια φόρτισης της μπαταρίας
- Λειτουργία ελέγχου κατάστασης μπαταρίας
- Νυκτερινή λειτουργία
- Εξοδος φορτίου με προστασία αποφόρτισης μπαταρίας , προστασία υπεβολικού φορτίου και βραχυκυκλώματος.
- Προστασία ανάστροφης πολικότητας φωτοβολταικού – μπαταρίας.
Manufacturer | Victron Energy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95 % RF (nicht kondensierend) |
Protection IP | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20°C - +50°C |
Inverting remote on-off cable
Victron BlueSolar PWM-Light 12/24V-10A – Ρυθμιστής Φόρτισης PWM 10A για Φωτοβολταϊκά
Victron BlueSolar PWM-Light 12/24V-10A - Ρυθμιστής Φόρτισης PWM 10A για Φωτοβολταϊκά
Προγραμματιζόμενος με νυχτερινή λειτουργία
- Ο ρυθμιστής φόρτισης BlueSolar PWM Light 12/24V-10A είναι έτοιμος για χρήση με τις προεπιλεγμένες ρυθμίσεις του.
- Τρία στάδια φόρτισης της μπαταρίας
- Λειτουργία ελέγχου κατάστασης μπαταρίας
- Νυκτερινή λειτουργία
- Εξοδος φορτίου με προστασία αποφόρτισης μπαταρίας , προστασία υπεβολικού φορτίου και βραχυκυκλώματος.
- Προστασία ανάστροφης πολικότητας φωτοβολταικού – μπαταρίας.
Τεχνικά Χαρακτηριστικά
Charge Controller Type | PWM |
---|---|
System Voltage | 12V, 24V |
Permitted Humidity | max. 95 % RF (nicht kondensierend) |
Protection IP | IP20 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20°C - +50°C |
Victron BlueSolar PWM PRO 12/24V-5A – Ρυθμιστής Φόρτισης PWM (12/24V) 5A για Φωτοβολταϊκά
Victron BlueSolar PWM PRO 12/24-5A - Ρυθμιστής Φόρτισης PWM (12/24V) 5A για Φωτοβολταϊκά
Η σειρά BlueSolar PWM-Pro είναι έτοιμη προς χρήση με τις προεπιλεγμένες ρυθμίσεις. Διαθέτει τρία στάδια φόρτισης μπαταριών (Bulk, absortion, float), προστασία από βραχυκύκλωμα και υπερ-εντάσεις όπως και από ανάστροφη πολικότητα των ηλιακών συλλεκτών και/ή της μπαταρίας. Με αυτόν το τρόπο η μπαταρία σας φορτίζεται έτσι με τον καλύτερο τρόπο με αποτέλεσμα την πολύ μεγαλύτερη διάρκεια ζωής της ενώ παράλληλα εξασφαλίζεται η ομαλή λειτουργία του φωτοβολταικού σας συστήματος. Επίσης ο ρυθμιστής φόρτισης BlueSolar PWM-Pro 12/24V-5A της Victron μπορεί να προγραμματιστεί με τη βοήθεια του ενσωματωμένου τηλεχειριζόμενου πίνακα ελέγχου BlueSolar Pro καθιστώντας τον μια απο τις καλύτερες επιλογές της αγοράς.
Τεχνικά Χαρακτηριστικά
Manufacturer | Victron Energy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95 % RF (nicht kondensierend) |
Protection IP | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20°C - +50°C |
Victron BlueSolar PWM Charge Controller-LCD and USB 12/24V/5A ρυθμιστής φόρτισης 5A
Skylla-i remote on-off cable
Victron Skylla-i remote on-off cable
Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged.
This cable is intended for on/off control of the Skylla-i when the source is high when the Skylla-i must be on, and low or free floating when the Skylla-i must be off.
Specifications:
Maximum input voltage: 70V
Minimum input voltage needed for switch on: Approx. 6V
Switch off level: Input voltage must be less than 1V or must be free floating
Victron BlueSolar PWM PRO 12/24V-10A – Ρυθμιστής Φόρτισης PWM (12/24V) 10A για Φωτοβολταϊκά
Victron BlueSolar PWM PRO 12/24V-10A - Ρυθμιστής Φόρτισης PWM (12/24V) 10A για Φωτοβολταϊκά
Η σειρά BlueSolar PWM-Pro είναι έτοιμη προς χρήση με τις προεπιλεγμένες ρυθμίσεις. Έχει τρία στάδια φόρτισης μπαταριών (Bulk, absortion, float), προστασία από βραχυκύκλωμα και υπερ-εντάσεις όπως και από ανάστροφη πολικότητα των ηλιακών συλλεκτών και/ή της μπαταρίας. Αυτές οι μοναδικές λειτουργίες καθιστούν τον ρυθμιστή BlueSolar PWM -Pro 12/24V-10A έναν απο τους πιο αξιόλογους ρυθμιστές της αγοράς. Επίσης με τη βοήθεια του ενσωματωμένου τηλεχειριζόμενου πίνακα ελέγχου BlueSolar Pro μπορεί να προγραμματιστεί εύκολα, γρήγορα και σωστά.
Τεχνικά Χαρακτηριστικά
Manufacturer | Victron Energy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fernanzeige Pro Fernbedienpanel, PWM-Pro zu USB Interface Kabel, Temperaturfuehler |
Permitted Humidity | max. 98% (nicht kondensierend) |
Protection IP | IP30 |
Charging Current max. | 10A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 10A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20°C - +50°C |
Τιμή χωρίς ΦΠΑ
Victron BlueSolar PWM-Light 12/24V-20A – Ρυθμιστής Φόρτισης PWM 20A για Φωτοβολταϊκά
Victron BlueSolar PWM-Light 12/24V-20A - Ρυθμιστής Φόρτισης PWM 20A για Φωτοβολταϊκά
Ρυθμιστής φόρτισης της Victron με εσωτερικό αισθητήρα θερμοκρασίας. Έχει τρία στάδια φόρτισης μπαταριών (Bulk, absortion, float), προστασία από βραχυκύκλωμα και υπερ-εντάσεις όπως και από ανάστροφη πολίκότητα των ηλιακών συλλεκτών και/ή της μπαταρίας.
Τεχνικά Χαρακτηριστικά
Charge Controller Type | PWM |
---|---|
System Voltage | 12V, 24V |
Permitted Humidity | max. 95 % RF (nicht kondensierend) |
Protection IP | IP20 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20°C - +50°C |