Καλώδιο ρυθμιστή φόρτισης Communication cable CC-USB-TTL-150U για ρυθμιστές φόρτισης, EPsolar LS-BP,LS-BPL,TRACER-BP,TRACER-BPL,DCCP-DP Solar Controller
Τιμή χωρίς ΦΠΑ
21.00 € 11.50 € + ΦΠΑ
Καλώδιο ρυθμιστή φόρτισης Communication cable CC-USB-TTL-150U για ρυθμιστές φόρτισης, EPsolar LS-BP,LS-BPL,TRACER-BP,TRACER-BPL,DCCP-DP Solar Controller
Τιμή χωρίς ΦΠΑ
Σε απόθεμα
CompareΚαλώδιο ρυθμιστή φόρτισης Communication cable CC-USB-TTL-150U για ρυθμιστές φόρτισης, EPsolar LS-BP,LS-BPL,TRACER-BP,TRACER-BPL,DCCP-DP Solar Controller
Τιμή χωρίς ΦΠΑ
Βάρος | 1 kg |
---|---|
Brand |
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. Also, theavailability of the lighting will increase, even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED driver.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older software version can be updated for this
Τιμή χωρίς ΦΠΑ
Αισθητήρας θερμότητας για τους ρυθμιστές φόρτισης BlueSolar PWM-Pro.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
The temperature sensor is compatible with the following Victron charge controllers:
SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445
SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445
SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445
Delivery scope:
1x Victron Temperature Sensor for BlueSolar PWM-Pro
Victron Skylla-i remote on-off cable
Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged.
This cable is intended for on/off control of the Skylla-i when the source is high when the Skylla-i must be on, and low or free floating when the Skylla-i must be off.
Specifications:
Maximum input voltage: 70V
Minimum input voltage needed for switch on: Approx. 6V
Switch off level: Input voltage must be less than 1V or must be free floating
Carrier information.
Payment methods.
Unlimited help desk.
View our benefits.
Track or cancel orders.
No account yet?
Create an Account
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.