Ένα σύστημα ελέγχου και διαχείρισης πληροφοριών για όλα τα QUATRO να επικοινωνούν αποτελεσματικά με το συντονισμό τους μέσω της θύρας USB επικοινωνίας.
Τιμή χωρίς ΦΠΑ
73.00 € 59.00 € + ΦΠΑ
Μετατροπέας USB Victron Interface IVI VIC MK2-USB
Τιμή χωρίς ΦΠΑ
Σε απόθεμα
CompareΈνα σύστημα ελέγχου και διαχείρισης πληροφοριών για όλα τα QUATRO να επικοινωνούν αποτελεσματικά με το συντονισμό τους μέσω της θύρας USB επικοινωνίας.
Τιμή χωρίς ΦΠΑ
Βάρος | 1 kg |
---|---|
Brand |
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. Also, theavailability of the lighting will increase, even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED driver.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older software version can be updated for this
Τιμή χωρίς ΦΠΑ
Αισθητήρας θερμότητας για τους ρυθμιστές φόρτισης BlueSolar PWM-Pro.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
The temperature sensor is compatible with the following Victron charge controllers:
SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445
SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445
SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445
Delivery scope:
1x Victron Temperature Sensor for BlueSolar PWM-Pro
Αισθητήρας θερμότητας για το BlueSolar PWM-Pro.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
Τιμή χωρίς ΦΠΑ
Η σειρά BlueSolar PWM-Pro είναι έτοιμη προς χρήση με τις προεπιλεγμένες ρυθμίσεις. Διαθέτει τρία στάδια φόρτισης μπαταριών (Bulk, absortion, float), προστασία από βραχυκύκλωμα και υπερ-εντάσεις όπως και από ανάστροφη πολικότητα των ηλιακών συλλεκτών και/ή της μπαταρίας. Με αυτόν το τρόπο η μπαταρία σας φορτίζεται έτσι με τον καλύτερο τρόπο με αποτέλεσμα την πολύ μεγαλύτερη διάρκεια ζωής της ενώ παράλληλα εξασφαλίζεται η ομαλή λειτουργία του φωτοβολταικού σας συστήματος. Επίσης ο ρυθμιστής φόρτισης BlueSolar PWM-Pro 12/24V-5A της Victron μπορεί να προγραμματιστεί με τη βοήθεια του ενσωματωμένου τηλεχειριζόμενου πίνακα ελέγχου BlueSolar Pro καθιστώντας τον μια απο τις καλύτερες επιλογές της αγοράς.
Τεχνικά Χαρακτηριστικά
Manufacturer | Victron Energy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V |
Permitted Humidity | max. 95 % RF (nicht kondensierend) |
Protection IP | IP20 |
Charging Current max. | 5A |
Standby Self-Consumption | 10mA |
Battery Voltage | 12V, 24V |
Load Current max. | 5A |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 5A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20°C - +50°C |
Η σειρά BlueSolar PWM-Pro με προεπιλεγμένες ρυθμίσεις λειτουργίας αποτελεί μια απο τις πιο συμφέρουσες κα αξιόπιστες λύσεις της αγοράς. Ο ρυθμιστής φόρτισης BlueSolar PWM-Pro 12/24V-20A διαθέτει τρία στάδια φόρτισης μπαταριών (Bulk, absortion, float) πράγμα που μεγιστοποιεί την διάρκεια ζωής της μπαταρίας και την ομαλή λειτουργία του φωτοβολταικού σας συστήματος. Επίσης διαθέτει, προστασία από βραχυκύκλωμα και υπερ-εντάσεις όπως και από φαινόμενα ανάστροφης πολικότητα των ηλιακών συλλεκτών ή της μπαταρίας. Επίσης μπορεί να προγραμματιστεί με τη βοήθεια του ενσωματωμένου τηλεχειριζόμενου πίνακα ελέγχου BlueSolar Pro εύκολα, γρήγορα και σωστά.
Προγραμματιζόμενος με νυχτερινή λειτουργία
Τεχνικά Χαρακτηριστικά
Manufacturer | Victron Energy |
---|---|
Charge Controller Type | PWM |
System Voltage | 12V, 24V |
Connectivity | Fernanzeige Pro Fernbedienpanel, PWM-Pro zu USB Interface Kabel, Temperaturfuehler |
Permitted Humidity | max. 98% (nicht kondensierend) |
Protection IP | IP30 |
Charging Current max. | 20A |
Standby Self-Consumption | 10mA |
Max. Voltage Solar Module | 28V / 55V |
Max. Current Solar Module | 20A |
Number of Charging Outputs | 1 |
Ambient Temperature | -20°C - +50°C |
Carrier information.
Payment methods.
Unlimited help desk.
View our benefits.
Track or cancel orders.
No account yet?
Create an Account
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.