Η μεγαλύτερη ποικιλία απο καλώδια, βύσματα και παρελκόμενα για φωτοβολταικά, inverters, φορτιστές μπαταριών, σταθεροποιητές τάσης κ.α.
Παρελκόμενα αξεσουάρ, καλώδια, βάσεις, βύσματα, connectors, multi contact, ανταλλακτικά, για φωτοβολταικά, ανεμογεννήτριες, αντλίες, φωτοβολταικά συστήματα, καλώδια σύνδεσης φωτοβολταικων, καλώδια για φωτοβολταικα τιμές, βύσματα καλωδίων 12v, βύσματα καλωδίων ρεύματος, καλώδια dc φωτοβολταϊκά, καλώδια συνεχούς ρεύματος, σύνδεση φωτοβολταικων με μπαταριές, καλώδια solar.
Βρες καλώδιο φωτοβολταικών στην κατηγορία Αξεσουάρ Φωτοβολταϊκών στην καλύτερη τιμή της αγοράς. Μόνο εδώ θα βρείτε προϊόντα χαμηλής ενεργειακής κατανάλωσης, καλώδια για φωτοβολταικά, ανεμογεννήτριες, αντλίες, αυτόνομα συστήματα κ.α.
Καλώδιο Solar F1x4
Καλώδιο Solar F1x6
Ακροδέκτης MC4 Αρσενικός
Καλώδιο Solar F1x10
Ακροδέκτης MC4 θηλυκός
Καλώδιο Solar F1x16
Καλώδιο Solar F1x25
VE.Direct TX digital output cable (PWM light dimming cable)
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. Also, theavailability of the lighting will increase, even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED driver.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older software version can be updated for this
Τιμή χωρίς ΦΠΑ
Temperature sensor for BlueSolar PWM-Pro
Αισθητήρας θερμότητας για τους ρυθμιστές φόρτισης BlueSolar PWM-Pro.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
The temperature sensor is compatible with the following Victron charge controllers:
SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445
SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445
SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445
Delivery scope:
1x Victron Temperature Sensor for BlueSolar PWM-Pro
Victron Temperature sensor for BlueSolar PWM-Pro
Αισθητήρας θερμότητας για το BlueSolar PWM-Pro.
Description
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
Τιμή χωρίς ΦΠΑ
SCC VIC BlueSolar PWM-Pro to USB interface cable
Καλώδιο ρυθμιστή φόρτισης Communication cable CC-USB-TTL-150U
MC4-Tx3- Female Διακλαδωτήρας
Ακροδέκτης τύπου Τ για σύνδεση (3) τριών "Θηλυκών" βυσμάτων φωτοβολταικών πάνελ με ένα "Αρσενικό" ( Male)
Solar MC4 branch 3 female to 1 fmale Y piece splitter
Use with strings of panels where the maximum voltage is met for your inverter and you require a second string to add wattage. Or simply use it to connect 3 x 12v /24v panels in parallel to keep a 12v/24v output.
O rings for secure protection from the elements.
Easy, fast "SNAP IN" locking system and the UK industry standard for DC solar connectors.
Specification
Rated current 30A
Max voltage 1000v
Mated protection IP67
Safety class 2
-40 to 90 degrees C
Ελάχιστη ποσότητα 2 τεμάχια
Τιμή χωρίς ΦΠΑ