Συσκευή διασύνδεσης BMV με PC για εξαγωγή σε Excel δεδομένων φόρτισης / εκφόρτισης μπαταριών
Τιμή χωρίς ΦΠΑ
592.00 € + ΦΠΑ
Συσκευή διασύνδεσης BMV με PC για εξαγωγή σε Excel δεδομένων φόρτισης / εκφόρτισης μπαταριών
Τιμή χωρίς ΦΠΑ
Σε απόθεμα
CompareΣυσκευή διασύνδεσης BMV με PC για εξαγωγή σε Excel δεδομένων φόρτισης / εκφόρτισης μπαταριών
Τιμή χωρίς ΦΠΑ
Βάρος | 1 kg |
---|---|
Brand |
Inverter (αντιστροφέας) Victron Ολλανδικής προέλευσης, για αυτόνομα συστήματα (φωτοβολταϊκά, αιολικά, υβριδικά).Καθαρού ημιτόνου, υψηλή απόδοση και με υψηλή ισχύς κορυφής στα 4000W. Κατάλληλο για μεγάλη γκάμα εφαρμογών, ικανό να παρέχει ισχύ, χωρίς προβλήματα, σε κάθε φορτίο. Αριστη επαγγελματική ποιότητα συμπαγές και ελαφρύ.Με δυνατότητα σύνδεσης σε παράλληλη και τριφασική διάταξη.
Τεχνικά χαρακτηριστικά
Manufacturer | Victron Energy |
---|---|
Constant AC-performance | 1600W |
Input Voltage (V DC) | 9,5 - 17V |
Rated Output Voltage | 230V AC / Wechselstrom |
No-Load Self-Consumption | 9W |
Frequency Range | 50Hz / +-0,1Hz oder 50Hz / +-0,1Hz (regulierbar) |
quality of power | echte Sinuswelle |
Standby Self-Consumption | 3W |
Temperature Range | -40°C bis 65°C |
Protection IP | IP21 |
Peak Performance | 4000W |
Permitted Humidity | max. 95 % RF (nicht kondensierend) |
Voltage Control | 12V DC / 230V AC |
This cable is designed for lighting applications in solar energy systems. (more applications will follow later).
Energy consumption can be significantly reduced by the ability to dim lightingwhen needed.
Lower power consumption will reduce the overall system cost. Also, theavailability of the lighting will increase, even in case of a partially chargedbattery in low sun.
The cable connects the TX output of the VE.Direct connector of an MPPT75/15 or 100/15 with the PWM dimmer input of the LED driver.
The MPPT charge controller must have a software version 1:15 or higher.
A MPPT charge controller with an older software version can be updated for this
Τιμή χωρίς ΦΠΑ
Αισθητήρας θερμότητας για το BlueSolar PWM-Pro.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery's underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
Τιμή χωρίς ΦΠΑ
Ακροδέκτης τύπου Τ για σύνδεση (3) τριών "Θηλυκών" βυσμάτων φωτοβολταικών πάνελ με ένα "Αρσενικό" ( Male)
Solar MC4 branch 3 female to 1 fmale Y piece splitter
Use with strings of panels where the maximum voltage is met for your inverter and you require a second string to add wattage. Or simply use it to connect 3 x 12v /24v panels in parallel to keep a 12v/24v output.
O rings for secure protection from the elements.
Easy, fast "SNAP IN" locking system and the UK industry standard for DC solar connectors.
Specification
Rated current 30A
Max voltage 1000v
Mated protection IP67
Safety class 2
-40 to 90 degrees C
Ελάχιστη ποσότητα 2 τεμάχια
Τιμή χωρίς ΦΠΑ
Victron Skylla-i remote on-off cable
Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged.
This cable is intended for on/off control of the Skylla-i when the source is high when the Skylla-i must be on, and low or free floating when the Skylla-i must be off.
Specifications:
Maximum input voltage: 70V
Minimum input voltage needed for switch on: Approx. 6V
Switch off level: Input voltage must be less than 1V or must be free floating
Carrier information.
Payment methods.
Unlimited help desk.
View our benefits.
Track or cancel orders.
No account yet?
Create an Account
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.